At Home Drywall and Painting Minneapolis St Paul MN – we offer a portfolio of complete Drywall Services from start to finish! Our goal is to fulfill every home remodeling need that is expected by our customers. We specialize in this by taking the job from the first stage of demolition to the final paint stage with only one call. Below you can find a complete list of all the drywall services that we offer in the Twin Cities of Minneapolis and St Paul MN. Just know, if it has anything to do with drywall or sheetrock – Home Drywall has you covered!
Drywall Services | We provide all our drywall services to both, Residential and Commercial spaces!
INSTALLATION / HANGING: Hanging drywall may be just as important as the finishing part of drywall. Our professional drywall hangers and sheetrockers understand this. Using the proper equipment and years of experience we can do a flawless job every time.
TAPING: Taping as we all know takes a special touch! All of our Sheetrock tapers have been trained by many years of hard work. Taping and drywall mudding goes on in a standard three coat process. The first coat is applying the tape coat.
FINISHING: The second is covering the tape coat with a 10 inch trowel. The third coat is a finish coat with a 12 inch trowel covering any imperfections caused by the second coat, then a final light sand to make a perfect finish.
TEXTURING: Texturing is one of our specialties! A nice ceiling texture can make the whole job turn out nice. We can match, blend or remove texture. Some of the most common textures are knock down, orange peel and popcorn. We recommend using the knockdown texture being that is easy to clean, easy to paint in the future and it gives your Minneapolis/St Paul MN home an elegant look.
PAINTING: Our painters take special care of your home. Preparing before painting starts is the most important in the process. We use a variety of different finishes of paint. The different types of finishes are important to know about.( Flat) has no shine to it, easy to repair but not recommended to wash.
(Satin) has a slight sheen to it, just a bump up from flat. (Egg shell) recommended for areas where walls or ceilings will be getting a tot of traffic or areas that need to be washed-cleaned. (Semi-gloss or high gloss) is extremely glossy looking, not recommended in areas where there is natural light or artificial light. Recommended in areas where there is heavy cooking or lots of moisture.
Walls or ceilings getting an Egg shell, semi-gloss or high gloss finish will need to be prepared to a level 4 or 5 finish, which may cost a bit more.
DEMOLITION: This stage of work is dusty and messy. We take this in consideration in people’s homes. We minimize dust by setting up plastic barriers where we are working and doing a complete cleanup before we leave the project.
SMOKE-FIRE–WATER-DAMAGE: Smoke by fire or cigarette can smell in a home that never goes away. We can minimize or eliminate this problem. Depending on how extensive you want to get we can get below the carpet or behind the ceilings and walls.
Smoke, fire or water damage may be covered by your insurance company. We can contact your insurance company to save you money!
Drywall Services | Our Levels of Drywall Finishes
No taping, finishing, or accessories required.
Usage: Temporary construction or when final decoration is undetermined.
All joints and interior angles shall have tape set in joint compound. Surface shall be free of excess joint compound. Tool marks and ridges are acceptable.
Usage: Above false ceilings or other areas that are out of public view where a degree of fire and noise resistance is required.
All joints and interior angles shall have tape embedded in joint compound and wiped with a joint knife leaving a thin coating of joint compound over all joints and interior angles. Fastener heads and accessories shall be covered with a coat of joint compound. Surface shall be free of excess joint compound. Tool marks and ridges are acceptable. Joint compound applied over the body of the tape at the time of tape embedment shall be considered a separate coat of joint compound and shall satisfy the conditions of this level.
Usage: As a substrate for tile walls and ceilings as well as in garages, warehouses, and other places where appearance is not a primary concern.
All joints and interior angles shall have tape embedded in joint compound and one additional coat of joint compound applied over all joints and interior angles. Fastener heads and accessories shall be covered with two separate coats of joint compound. All joint compound shall be smooth and free of tool marks and ridges. It is recommended that the prepared surface be coated with a drywall primer prior to the application of final finishes.
Usage: Suitable base for heavy-medium textured paint or other thick finishes.
All joints and interior angles shall have tape embedded in joint compound and two separate coats of joint compound applied over all flat joints and one separate coat of joint compound applied over interior angles. Fastener heads and accessories shall be covered with three separate coats of joint compound. All joint compound shall be smooth and free of tool marks and ridges. It is recommended that the prepared surface be coated with a drywall primer prior to the application of final finishes.
Usage: “Standard” household and office walls. Used with light or non-textured finishes. Not suitable for harsh lighting conditions, which may highlight minor imperfections.
All joints and interior angles shall have tape embedded in joint compound and two separate coats of joint compound applied over all flat joints and one separate coat of joint compound applied over interior angles. Fastener heads and accessories shall be covered with three separate coats of joint compound. A thin skim coat of joint compound, or a material manufactured especially for this purpose, shall be applied to the entire surface. The surface shall be smooth and free of tool marks and ridges. It is recommended that the prepared surface be coated with a drywall primer prior to the application of finish paint. The skim coat is a final leveling agent suitable to smooth out a surface to be used under the harshest lighting conditions that may otherwise highlight any imperfections under the finished surface.
Usage: Gloss and entirely non-textured surfaces.
Drywall Services | ON SITE MANAGEMENT: Choosing Home Drywall and Painting, you’re getting taken care of! We will always have a specialized drywall or painting technician on site to answer any questions you may have.
Below you can see more of our home remodeling specialties in addition to our drywall services:
- New construction, Remodel, Commercial, Industrial, Basements, Bathrooms, Kitchens, Additions
- Acoustic ceilings
- Barrel vault ceilings
- Domed ceilings
- Fog-coated ceilings
- Knockdown ceilings
- Orange peel ceilings
- Smooth ceilings
- Sprayed ceilings
- Curved walls & soffits
- Custom / detail work
- Archway corners
- Bullnose corners
- Columns, pillars
- Fast arch
- Fog-coated walls
- Hand texturing
- Knockdown walls
- Mold resistant drywall
- Niches & custom recessed areas
- Orange peel walls
- Sound proofing
- Specialty veneer plastering
- Spray Textures
- Venetian & veneer plastering
- Window returns
- Enviromentally conscious debris removal
- Water damage repair
- New construction, Remodel, Commercial, Industrial, Basements, Bathrooms, Kitchens, Additions, decks, fences
- Pressure washing
- Color Matching
- Custom / detail work
- Cabinet painting
- Color matching
- Deck staining / sealing
- Decorative painting & finishes
- Distressed finishing
- Faux finishing
- Green / low VOC coatings
- Power washing & mildew removal
- Exterior & interior house painting
Contact Us Today at (612) 816-5333
The Residential and Commercial Drywall Services by our Drywall Contractors MN Team are available in all the following Minnesota Suburbs:
If you want to see more of our blogs just click on the link of interest: