Drywall Contractor Maple Plain MN
The key with this kind of repair is making sure that the drywall patch is of equal thickness with the drywall used in the walls. Note that, in some cases, you may need to paint your whole wall to make sure your drywall patch is not detectable. Repair small holes by applying a drywall patch a bit larger than the patched area. If you have to enlarge a hole in order to achieve a better look, use your drywall knife to make horizontal cuts into the hole - just be sure you do not dig more than about an inch into it. For smaller holes and popping nails, apply two to three thin coats of drywall adhesive using 4-inch-long drywall knives. Set a new piece in place and secure with 1-1/2-inch-long drywall nails, which have a very fine, flat head and are easier to hide in the joint compound than with drywall screws.
Installing drywall in your garage costs between $800 to $5,000, depending on your garages dimensions and your drywall finishing levels. To help simplify those decisions, it is good to figure out drywall panel costs and installation. Assuming that you are not looking for the flashiest finishes or the most expensive types of drywall panels, it is not unreasonable to budget about $1,500 for this kind of work, including installation..
Hanging your drywall the right way makes all the difference in quality, strength, and appearance of your finished work. Having adequate assistance is essential, particularly since hanging longer stretches of drywall is preferred.
Building the home of your dreams? Let our staff handle your drywall installation project from beginning to end. You can rest assured that no corners will be cut in the process with our team. With over 10 years of experience in the industry, your newly finished room or home will have that professional look that you’ve always wanted.