Drywall Installation: Tips to Help You Through the Process

Choosing where, when, and how to cut your drywall sheets makes all the difference in achieving a seamless appearance. Similarly, using the right tools and techniques goes a long way. Here are the top 8 tips to help you through the process of drywall installation.

#1 Cut through the good side

Cutting through the good side of the drywall saves time. Moreover, cutting through the paper on the good side helps you get a polished look. That is because if you cut through the backside first, you may tear away the paper on the good side.

#2 Trim in place, if possible

Do not cut the drywall to an exact length if you hang it past the end of the wall. First, fasten the drywall to the frame, then take a sharp cutter and snap away from the panel. Again, cut through the good side to achieve a smooth finish.

#3 Hang and cut openings

One of the greatest mistakes people make is cutting openings before placing the drywall. It is best to cut the drywall when it is in place to get more accurate cuts. This includes openings through the walls: electrical boxes, pipes, LED lights, etc.

#4 Cut short to get the right fit

Try to cut drywall shorter by ½ or 3/8 without including the taped joints. Also, you can save a lot of time because you do not need to cut it again and again for a better fit.

#6 Mark for framing, light fixtures, and electrical boxes

Use a marker to mark framing locations directly at every study. Mark the distance from perpendicular walls to each ceiling box to find every light fixture.

#7 Use adjustable benches

Adjustable benches have adjustable legs that you can easily use to work off on the right height in case of a height difference. If you need to support a sheet on the ceiling, place your head directly against the ceiling.

#8 Use these tools for drywall installation

Here is a list of all the tools you need for an easier drywall installation process:

Foot jack: Helps you keep your hands free for easy screw driving
Drywall lift: Helps you install drywall to ceiling quickly
Auto-feed driver: Saves time spent driving screws by hand
Auto-feed adhesive dispenser: Helps tape quickly and avoid the mess
Mini router: Accurate and efficient cutting of recessed lights and electrical boxes

Additional Drywall Installation Tips

DON’T use scraps of drywall. Use a full sheet of drywall to save time, expenses, and effort required to tape extra joints.
DO pay attention to drywall sanding before you paint it.
DON’T use the thinner edges on outside corners.
DO remove loose rock chunks, blisters, or broken corners.

Hire an expert for drywall installation!

Drywall installation is a simple process; however, you need experience, patience, and time to install the drywall properly. At Home Drywall & Painting, we offer affordable drywall installation services. Contact our experts to receive a quote now!

We offer Drywall and Painting Services in the Following Cities

Contact us

Drywall Installation: Tips to Help You Through the Process

Drywall Installation: Tips to Help You Through the Process

We offer Drywall and Painting Services in the Following Cities

(612) 816-5333

(720) 583-5891