A Complete Guide on Drywall Taping Like a pro

A Drywall is made up of gypsum, sandwiched between two paper boards. Installation of drywall is faster and cost-effective compared to plaster. In a drywall taping project, you can save hundreds of dollars if you are a DIY enthusiast. Proper taping will make your drywall seem as if it was hung by a pro!

If you are struggling with the drywall taping project, fret not! You can always get in touch with your local drywall taping company in Coon Rapids!

In this post, we tell you how to tape drywall like a pro!

Drywall taping like a pro

Here is how homeowners in Coon Rapids can tape drywall like an expert:

Required Materials

1-5/8 inch Drywall Nails
All-purposes Compounds
Corner beads
Paper tape
Setting compound

Required Tools

Banjo taping tool
Hawk
Tapping knife
Corner cylinder

Selection Of The Right Tape

Paper Tape

Paper tape can be used with drying-type as well as setting-type compounds. Professional drywall taping contractors in Coon Rapids mostly use this tape because it is easier and cleaner to handle.

Fiberglass Mesh Tape

Fiberglass self-sticking tape eliminates the need for the first coat of compound. So, this may be a quick fix if you are in a rush.

Drywall Taping Step-By-Step Guide:

#1 Pre Fill gaps with setting compound.

The setting-type compound is preferred for prefilling because it hardens quickly and does not shrink. Since it hardens quickly, be sure to be quick when mixing the compound. If the compound has hardened but is not completely dry, use a taping knife to scrape off the bumps.

#2 Apply the First Coat of the compound.

You should use an all-purpose, drying-type, heavyweight joint compound for embedding paper tape because it is stronger than other compounds available on the market. Cover the butt joints first by turning the taping knife sideways.

#3 Embed the tape.

Embedding the tape is the most important part of the drywall taping process. If your tape is embedded properly in the joint compound, only then can you create a strong foundation.

#4 Press the end of the paper tape into the compound.

You can use one hand at one end of the seam and center it over the rest. Then, press it slightly into the compound up to 18 inches while keeping the tape tightly pulled as it is centered over the joint. If you have reached the end of the seam, then you can cut the tap.

#5 Cut the tape from the seam end.

With your taping knife, push the edge of the blade right into the compound. After that, pull the tape across the blade, tearing it crisply.

#6 Tape the inside or outside corners.

Fill inside corners with pre-creased tape. For outside corners, apply the compound to the wall corner with a 6-inch drywall knife.

#7 Repeat

Apply at least 2 final coats for a better finish.

Conclusion:

Hopefully, these guidelines will help you tackle your drywall taping project. But if you want to save your time, or are looking for a high-quality finish, then you should contact a professional drywall company in Coon Rapids such as HOME DRYWALL AND PAINTING. Our professional drywall taping contractors in Coon Rapids use the best available and affordable products to tape your drywall successfully. Give us a call to book an appointment now!

We offer Drywall and Painting Services in the Following Cities

Contact us