The DOs and DON’Ts of Drywall Installation for Homeowners in Coon Rapids

Drywall installation is an essential home renovation project. So, you need to know the dos and don’ts of drywall installation. This blog shows you exactly that.

If the dos and don’ts seem tricky, then you can get in touch with a professional drywall installation company such as Home Drywall and Painting to hire expert local drywall contractors in Coon Rapids.

DO use the right type and number of screws

Screws hold the studs, so the key here is to choose screws designed for drywall installation. These screws are specifically designed to prevent the drywall from slipping.

Moreover, you need to use the right number of screws per sheet. As a rule of thumb, do use 28 to 36 screws per drywall sheet. You can also divide the length of drywall by 16 inches to determine the right number of screws.

DO use the right screwdriver

Using the wrong screwdriver can strip the screws of the drywall. So, choose screws of different sizes. Here are a few common screwdriver types for drywall installation:

Slotted (for common screws)
Crosshead (for fastening)
Robertson (for square screws)

DO let the tape dry properly

Do not disturb drywall tape until it is properly dry. Interfering with the tape causes it to rip and ruin your job.

DO let the drywall compound dry completely

Do not disturb the drywall compound until it is completely dry. Disturbing the compound causes damage to the drywall. The drying time may depend on the weather conditions as well as the amount of compound you have used.

DON’T install drywall over paper

If there is any type of paper on the wall, make sure that it is not easily damaged by moisture or water.

DON’T install drywall over paint

Installing the drywall over paint causes the drywall to stick onto the old paint. This way, you can ruin the drywall.

DON’T overtighten the screws

Overtightening the screws can cause dimples, dips, and ridges on the wall. Before drywall installation, read the guide for every screw type to ensure how tight you need to fasten the screws.

DON’T use nails for drywall installation

Using nails instead of screws can cause the drywall to fall off as nails are not able to hold the weight of the drywall. So, using the right type of screws is crucial for drywall installation.

The Takeaway

Drywall installation is a tricky process. Not everyone can DIY installing drywall at home. There are many common mistakes that homeowners make when they try to DIY the project. So, make sure to follow all the dos and don’ts of drywall installation.

If you feel like your drywall is not as strong or sturdy as it should be, then get in touch with a professional drywall contractor in Coon Rapids. A professional drywall company is worth your investment. So, get in touch with expert drywall contractors at Home Drywall and Painting in Denver and hire experienced, skillful, and knowledgeable drywall contractors today. Contact us to get a no-obligation quote now!

We offer Drywall and Painting Services in the Following Cities

Contact us

The DOs and DON’Ts of Drywall Installation for Homeowners in Coon Rapids

The DOs and DON’Ts of Drywall Installation for Homeowners in Coon Rapids

DO use the right type and number of screws

DO use the right screwdriver

DO let the tape dry properly

DO let the drywall compound dry completely

DON’T install drywall over paper

DON’T install drywall over paint

DON’T overtighten the screws

DON’T use nails for drywall installation

The Takeaway

We offer Drywall and Painting Services in the Following Cities

(612) 816-5333

(720) 583-5891