Drywall texturing mistakes you need to avoid

Drywall texturing is the last step of drywall finishing. Though drywall texturing may seem easy, it is not. Many homeowners tend to DIY texturing but drywall texturing is best left to professionals.

It is always a good idea to contact your local drywall texturing contractor in Coon Rapids for expert advice!

Here are the drywall texturing mistakes you need to avoid.

#1 Follow the instructions

Decide the type of drywall texture technique you want for your home. There are many types of textures that may vary depending on the way paint is applied. Slap brush, skip-trowel, orange peel, etc. are a few types of textures. All of these textures provide different types of finish.

So, if you are a beginner, the type of finish you want may be tricky to accomplish. Follow the instructions in the manual. If you cannot follow the instructions, it is best to get in touch with your local interior painting company in Coon Rapids.

#3 Mix the mixture properly

Mixing the paint properly is essential to achieve the type of texture you want. Some textures may be thicker depending on your preferences or the condition of the wall. All in all, your texturing mixture should not be too thick or too thin.

For example, if you want an orange peel texture, then a too-thick mixture can lead to a popcorn wall. So, the best way to achieve the desired texture is to add water slowly. Similarly, if the mixture is too thin, then you may end up with blemishes on the wall.

#3 Choose the right tools

Some texturing techniques require the use of brushes or rollers, whereas other techniques require the use of spray guns or paint pens. So, choosing the right texturing tools is the key to achieving the desired results.

For example, if you want sand swirl texture, then you require two people to complete the job. One person rolls the mixture, whereas the other person creates the patterns. If you are not quick enough, then the paint may dry before the design is complete.

So, it is important to choose the right tools for your selected texturing method. If you cannot achieve the desired results yourself, then it is best to hire a professional in Coon Rapids to complete the job.

#4 Prepare the drywall

It is not the best idea to start texturing the drywall if taping is coming off or if nails are protruding. So, before you start texturing, you need to ensure that the drywall is ready for texturing.

Sand the drywall, patch any holes, and repair peeling tape. The texturing paint adheres much better if the surface is smooth.

#5 Apply both primer and paint

Before you start texturing, it is important to prime the drywall. Choose the appropriate primer. The paint sticks much better on the drywall if it is primed beforehand.

The Takeaway

Drywall texturing is a complicated task. You need to follow a set of specific instructions and rules to achieve the desired results. So, if you are a beginner and you do not possess the experience, skills, and knowledge required to texture drywall properly, then it is best to get a quote from your local painting contractor in Coon Rapids.

At Home Drywall and Painting, we are a drywall painting and repair company in Coon Rapids, We have the experience, skills, and tools required to texture your drywall at affordable rates. Give us a call to get a quote now!

We offer Drywall and Painting Services in the Following Cities

Contact us