The Dos and Don’ts of drywall taping

A professional drywall taping tutorial makes it look so straightforward. They end up with a flawless finish and ultra-smooth walls. However, achieving seamless results requires the use of the right tools, appropriate techniques, and patience.

With these dos and don’ts, you can successfully complete drywall taping like a pro.

However, note that if you are not an expert, then it is best to get in touch with a professional drywall taping contractor in Lakeville.

DO use the power drill

Before you start taping, the drywall compound must be free of lumps. Mixing drywall compound by hand takes both time and patience, so the best thing you can do is to use your power drill and blend the mixture until it achieves a smooth consistency.

DON’T purchase the wrong mud

New tapers often choose the wrong drywall mud for their projects. Choosing the right mud ensures that you achieve sturdy and long-lasting results. So, choose an all-purpose compound that adheres to your walls, tape, and joints well. Also, use a topping compound for the last coat to achieve a professional look.

DO take steps to lessen the mess

Drywall taping is a messy process that can leave splatters of drywall mud everywhere. You can ruin your hair, hands, clothing, and your furniture. So, wear protective equipment such as a hat, safety goggles, gloves, and old clothes. Remove all the furniture from your room, and cover everything in the room with a plastic wrap.

DON’T overlap drywall tape

Apply a single layer of tape to lessen the chances of causing bulges and bumps in the wall. Apply a thin layer of the mud using a quality painter’s knife. Make sure to smooth the mud with a knife and then apply tape over the mud. Work your way from the muffle towards the ends of the tape to secure the tape in place.

DO cut away bubbles in the tape

Check for bubbles in the tape after applying a layer of drywall compound. If there are any bubbles, then it means that you have not used enough drywall mud and that the tape is not properly adhered to the surface. Apply a thin layer of mud over the bubbles and use a sharp knife to smooth everything out. Then, let it get dry.

DON’T skip screw holes while applying compound

It only takes a dab of drywall mud to cover the fastener. Smooth the mud over with a utility knife. Make sure only the head of the fastener is covered with mud and the wall around the fastener is completely clear. Remove excess mud with a utility knife.

DO apply multiple thin coats of compound

Rather than applying one thick coat of drywall compound, apply two or three thin layers of the compound. It may take time to dry but rushing the drywall taping process may lead to a hardened and lumpy compound. This way, you need less time to sand the drywall as well.

Do hire a professional drywall taping contractor in Lakeville

Still struggling? Get in touch with a professional drywall company such as Home Drywall and Painting in Lakeville to ensure that you get a professional drywall finish. Contact our drywall taping contractors in Lakeville for a quote now!

We offer Drywall and Painting Services in the Following Cities

Contact us